Yamaha E115A - Chapter 3 OPERATION; INSTALLATION; BREAKING IN (RUNNING IN) ENGINE; PRE-OPERATION CHECKS

EMU00174
Chapter 3
OPERATION
INSTALLATION .................................... 3-1
Mounting the outboard motor .............. 3-2
BREAKING IN (RUNNING IN)
ENGINE ................................................. 3-5
Running in the engine ......................... 3-5
PRE-OPERATION CHECKS ................ 3-7
FILLING FUEL AND ENGINE OIL ........ 3-8
Filling fuel ............................................ 3-8
Gasoline (petrol) and oil mixing .......... 3-9
STARTING ENGINE ........................... 3-11
WARMING UP ENGINE ...................... 3-19
SHIFTING ............................................ 3-20
Forward ............................................. 3-20
Reverse ............................................ 3-21
STOPPING ENGINE ........................... 3-22
TRIMMING OUTBOARD MOTOR ...... 3-23
Adjusting trim angle .......................... 3-24
TILTING UP/DOWN ............................ 3-27
CRUISING IN OTHER
CONDITIONS ...................................... 3-31
Cruising in salt water ........................ 3-31
Cruising in turbid water ..................... 3-31
E
1
2
3
4
5
6
60H-9-E1-3 3/1/02 9:38 PM Page 1