Need help?Do you have a question about the Yamaha MX825V-EFI and is the answer not in the manual?
Illustrates key engine features with labels pointing to components.
Provides a table comparing engine specifications with competitors.
Details 30-degree phase shift and internal oil passages for reduced vibration.
Explains lightweight, short-skirt pistons and thin rings for reduced friction.
Discusses multi-valve design and shim adjustment for performance and low maintenance.
Details forced lubrication system with trochoid pump, oil cooler, and strainer.
Explains FI system for balancing fuel efficiency, performance, and emissions.
Highlights 75-degree V-bank angle V-twin engine design for compact size.
Advises on safe operation, handling exhaust fumes, and fuel.
Covers electric shock, fluid leaks, accidental starts, and rotating parts hazards.
Details engine oil preparation and essential pre-operation checks.
Warns against operating in closed areas and reiterates the need for engine oil.
Provides a chart detailing maintenance tasks and their recommended intervals.
Guides on checking spark plug condition, type, gap, and tightening torque.
Details draining oil, replacing filter, and refilling with new oil.
Explains how to remove, clean, and replace air filter elements.
Covers fuel stabilization and engine protection for long-term storage.
Guides checks for oil, spark plug, and air filter when engine fails to start.
Explains how to check and replace fuses, warning about using specified fuses.
Details the functions and use of the FI diagnostic tool for error codes and sensor outputs.
Provides diagrams and information on engine wiring and components.
Lists key electrical components like battery, switch, and lamps and their wiring.
Explains how the oil pressure switch activates the warning light based on oil pressure.
Provides step-by-step instructions for measuring and adjusting valve clearance.
Details the operation of the fuel pump system, including vacuum and electric pumps.
Provides comprehensive technical specifications for the engine, including dimensions and performance.
Explains how to locate and record the machine's serial number for identification.
Lists components and acronyms related to the exhaust emission control system.
To Next Page
General
