3-6
E
3) Second hour:
Accelerate at full throttle onto plane,
then reduce engine speed to three-
quarter throttle (approximately 4,000
r/min). Vary engine speed occasionally.
Run at full throttle for one minute, then
allow about 10 minutes of operation at
three-quarter throttle or less to let the
engine cool.
4) Third through tenth hours:
Avoid operating at full throttle for more
than 5 minutes at a time. Let the engine
cool between full-throttle runs. Vary
engine speed occasionally.
5) After the first 10 hours:
Operate the engine normally. Use the
standard premix ratio of gasoline:oil.
Refer to “GASOLINE/PETROL AND
OIL MIXING” for details.
000984
000991
60H-9-E1-3 3/1/02 9:38 PM Page 7
To Next Page
Loading...
