E
3-29
UP
DN
701034
UP
DN
DN
UP
000921
001315
EMU01575
PROCEDURE FOR TILTING UP
Power trim and tilt models
1) Disconnect the fuel line or close the
fuel cock.
3) Turn the tilt support lever toward you to
support the engine.
w
8 After tilting the engine, be sure to sup-
port it with the tilt support lever.
Otherwise, the engine could fall back
down suddenly if oil in the power trim
and tilt unit should lose pressure.
8 Never operate the engine while it is
supported by the tilt support lever.
2) Push the power trim and tilt switch “UP”
until the outboard has tilted up com-
pletely.
60H-9-E1-3 3/1/02 9:38 PM Page 30
To Next Page
Loading...
