Trouble Recovery
105
1. Stop the engine.
2. Remove the top cowling.
3. Disconnect the water detection switch
coupler. NOTICE: Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
[ECM01951]
4. Remove the cover.
5. Remove the hose holder, and then re-
move the fuel filter from its holder.
1. Water detection switch coupler
1. Cover
1. Holder
2. Fuel filter
U6EK35E0.book Page 105 Monday, December 10, 2018 9:06 AM
©2020 Yamaha Motor Corporation
To Next Page
