Operation
69
sure. [EWM00263] NOTICE: Do not use the
tilt support lever or knob when traile-
ring the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be
trailered in the normal running posi-
tion, use an additional support device
to secure it in the tilt position. For
more detailed information, see page
72.
[ECM01642]
EMU42702
Procedure for tilting down
1. Push the power trim and tilt switch “ ”
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
3. Push the power trim and tilt switch “ ”
(down) to lower the outboard motor to
the desired position.
1. Tilt support lever
1. Tilt support lever
1. Power trim and tilt switch
1. Power trim and tilt switch
1. Power trim and tilt switch
U6EK71E0.book Page 69 Monday, December 8, 2014 10:28 AM
To Next Page
Loading...
