Trouble Recovery
95
5. Remove the starter/flywheel cover after
removing the bolt(s).
6. Secure the electrical system plate by
tightening the bolt(s), and fix the plate.
7. Prepare the engine for starting. For fur-
ther information, see page 49. Be sure
that the gear shift is in neutral and that
the clip is attached to the engine shut-off
switch. The main switch must be “ ”
(on), if equipped.
N
ZMU01771
6AG-9-3D-1E0.book 95 ページ ２０１５年１１月５日 木曜日 午前１１時７分
To Next Page
Loading...
