Yamaha F50D - Tilt Support Lever for Power Trim and Tilt or Hydro Tilt Model; Top Cowling Lock Lever(S) (Turn Type); Flushing Device; Tachometer

Basic components
17
protect the engine from electrochemical
corrosion. Never paint the trim tab as it
will become ineffective as an anode.
EMU26340
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
EMU26372
Top cowling lock lever(s) (turn type)
To remove the engine top cowling, turn the
lock lever(s) and lift off the cowling. When in-
stalling the cowling, check to be sure it fits
properly in the rubber seal. Then lock the
cowling again by returning the lever(s) to the
lock position.
EMU26460
Flushing device
This device is used to clean the cooling wa-
ter passages of the motor using a garden
hose and tap water.
NOTE:
For details on usage, see page 42.
EMU26470
Tachometer
This gauge shows the engine speed and has
the following functions.
1. Trim tab
2. Bolt
3. Cap
1
2
3
ZMU02525
A
B
ZMU03595
1. Top cowling lock lever(s)
1. Flushing device
1
ZMU05093
1
ZMU05095