Operation
42
2. Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
3. Place the throttle grip in the “”
(start) position.
4. Push the starter button to start the en-
gine.
NOTE:
●
If the engine does not start, place the throt-
tle grip in the “” (warm engine)
position and try again.
●
It is not necessary to use the choke when
starting a warm engine.
5. Immediately after the engine starts, re-
lease the starter button to allow it to re-
turn to its original position.
6. Slowly return the throttle grip to the fully
closed position.
U6AU11E0.book Page 42 Friday, September 7, 2007 10:51 AM
©2019 Yamaha Motor Corporation, U.S.A.
To Next Page
Loading...
