Operation
46
NOTE:
Tiller handle models: The gear shift lever op-
erates only when the throttle grip is in the fully
closed position.
To shift from in gear (forward/reverse) to neu-
tral
1. Close the throttle so that the engine
slows to idle speed.
2. After the engine is at idle speed in gear
move the remote control lever / gear shift
lever firmly and crisply into the neutral po-
sition.
EMU31742
Stopping boat
WARNING
EWM01510
● Do not use the reverse function to slow
down or stop the boat as it could cause
you to lose control, be ejected, or impact
ZMU02030
U6AU11E0.book Page 46 Friday, September 7, 2007 10:51 AM
©2019 Yamaha Motor Corporation, U.S.A.
To Next Page
Loading...
