PERIODIC MAINTENANCE AND ADJUSTMENT
7-20
7
EAU23213
Checking and lubricating the
centerstand and sidestand
The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-to-
metal contact surfaces should be lubri-
cated if necessary.
EWA10741
WARNING
_
If the centerstand or sidestand does
not move up and down smoothly,
have a Yamaha dealer check or re-
pair it. Otherwise, the centerstand or
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
_
EAU23272
Checking the front fork
The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic main-
tenance and lubrication chart.
To check the condition
Check the inner tubes for scratches,
damage and excessive oil leakage.
To check the operation
1. Place the vehicle on a level sur-
face and hold it in an upright posi-
tion. WARNING! To avoid injury,
securely support the vehicle so
there is no danger of it falling
over.
[EWA10751]
2. While applying the front brake,
push down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.
ECA10590
NOTICE
_
If any damage is found or the front
fork does not operate smoothly,
have a Yamaha dealer check or re-
pair it.
_
Recommended lubricant:
Lithium-soap-based grease
ZAUU0722
ZAUU0723
52BF8199E0.book Page 20 Friday, December 10, 2010 10:23 AM
To Next Page
Loading...
