Yamaha FL115A - Replacing Fuse

4-18
GB
000312
q
w
e
t
w
r
000313
t
EMU01330
REPLACING FUSE
If a fuse has blown, remove the electrical
cover, open the fuse holder and remove
the fuse with a fuse puller. Replace it with
a spare one of proper amperage.
w
Be sure to use the specified fuse. An
incorrect fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a fire
hazard.
NOTE:
If the new fuse blows again immediately,
consult a Yamaha dealer.
1 Electrical cover
2 Fuse holder
3 Fuse (30A×2, 20A×2)
4 Spare fuse (30A, 20A)
5 Fuse puller
68V-9-72 (GB,F,ES)-4B 4/20/01 11:54 AM Page 16