EasyManua.ls Logo

Yamaha FL115A - User Manual

Yamaha FL115A
207 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
F115A/FL115A
OWNER’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL PROPIETARIO
68V-28199-72
F115A
FL115A
GB
F
ES
68V-9-72/hyoshi 01.4.20 1:33 PM y[W 1 (2,1)

Table of Contents

Other manuals for Yamaha FL115A

Preview: Service Manual
Service Manual713 pages

Questions and Answers

  • S
    Sarah LewisAug 22, 2025
    How to fix a Yamaha FL115A when the starter will not operate?
    • P
      phillipburchAug 22, 2025
      If the starter on your Yamaha Outboard Motor won't operate, begin by checking the battery condition and ensuring it has the recommended capacity. Weak or low battery capacity can prevent the starter from working. Also, verify that the battery connections are tight and free from corrosion; tighten the battery cables and clean the battery terminals if necessary. Inspect the fuse for the electric start circuit and replace it with one of the correct amperage if it's blown, after checking for and repairing any electric overload. Make sure the engine stop switch lanyard is attached and the shift lever is in neutral. For faulty starter components, it is recommended to have your motor serviced by a Yamaha dealer.
  • M
    Megan JoyceAug 26, 2025
    How to troubleshoot a Yamaha FL115A Outboard Motor when the starter will not operate?
    • S
      Stephanie KellyAug 26, 2025
      If the starter on your Yamaha Outboard Motor won't operate, begin by checking the battery. Ensure it's in good condition and has the recommended capacity. Tighten any loose battery cables and clean corroded terminals. Inspect the fuse for the electric start circuit and replace it if blown, after addressing the cause of the overload. Ensure the engine stop switch lanyard is attached and the shift lever is in neutral.
  • J
    joelbeltranAug 28, 2025
    What to do if my Yamaha Outboard Motor gauge display does not wake up?
    • D
      Derrick BanksAug 28, 2025
      If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or replace the gauge itself.
  • M
    Michael OrozcoAug 30, 2025
    Why is the illumination not lighting on my Yamaha FL115A gauge?
    • K
      Kelly BakerAug 30, 2025
      If the illumination isn't lighting, it could be because of a power issue or a damaged gauge. You should try replacing the fuse, ensuring the couplers are securely connected, replacing any damaged wires or hubs, or replacing the gauge.
  • S
    Steven JohnsonAug 31, 2025
    Why does my Yamaha FL115A fuel management gauge show incorrect fuel consumption?
    • C
      Curtis WeaverAug 31, 2025
      If the fuel management gauge shows incorrect fuel consumption, the engine recognition may be wrong. To resolve this, default the engine number. Then, turn the key switch on in order from the portside engine to re-memorize each engine number.
  • K
    kristopher91Sep 2, 2025
    How to fix a Yamaha FL115A tachometer that shows incorrect engine RPM?
    • L
      lynnkeithSep 2, 2025
      If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong. Push the SET button for 10 seconds to default the engine number, and then memorize each engine number again.
  • L
    Lisa MorrisSep 4, 2025
    What to do if my Yamaha Outboard Motor speedometer shows the incorrect fuel level?
    • C
      Christina HarrisonSep 4, 2025
      If the speedometer shows an incorrect fuel level, the fuel sensor selection is likely wrong. You should set up the fuel sensor to the correct resistance.
  • L
    linda12Sep 6, 2025
    What does it mean when my Yamaha Outboard Motor gauge shows “----”?
    • B
      Brandon ScottSep 6, 2025
      If the gauge shows “----”, it indicates that the digital signal is not being received. Make sure the couplers are securely connected and replace any damaged bus wires or hubs.
  • E
    Elizabeth GreeneSep 8, 2025
    Why does my Yamaha Outboard Motor fuel management gauge show incorrect remaining fuel?
    • M
      michaelwiseSep 8, 2025
      If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting is probably wrong. Fill the tank with fuel, and then set the correct fuel tank capacity.
  • K
    kevin01Sep 10, 2025
    Why does my Yamaha Outboard Motor trim gauge show the incorrect position?
    • J
      Jimmy ChandlerSep 10, 2025
      If the trim gauge shows an incorrect position, the initial position setting might be wrong, or the trim sensor could be damaged. Put the motor in the fully trimmed-in position and reset the initial (zero) trim angle. If that doesn't work, replace the trim sensor.

Yamaha FL115A Specifications

General IconGeneral
BrandYamaha
ModelFL115A
CategoryOutboard Motor
LanguageEnglish

Related product manuals