Configuring the power supply settings
Setting the amount of time for the auto-standby
function
Set the amount of time for the auto-standby function.
Setup menu
“ECO” > “Auto Power Standby”
Settings
Off Does not set the unit to standby mode automatically.
5 minutes, 20 minutes
Sets the unit to standby mode when you have not operated the unit and
the unit has not detected any input signal for the specified time.
2 hours, 4 hours,
8 hours, 12 hours
Sets the unit to standby mode when you have not operated the unit for the
specified time.
Note
Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front
display.
Setting the use of the eco mode
You can reduce the unit’s power consumption by setting the eco mode to “On”. After
changing the setting, be sure to press ENTER to restart the unit.
When the eco mode is enabled, you can reduce the unit’s power consumption.
Setup menu
“
ECO” > “ECO Mode”
Settings
Off Disables the eco mode.
On Enables the eco mode.
Note
▪ When “ECO Mode” is set to “On”, the front display may become dark.
▪ If you want to play audio at high volume, set “ECO Mode” to “Off”.
En
95
To Next Page
Loading...
Need help?
General
