@YAMAHA
YAMAHA CORPORATION
© 2009Yamaha Corporation All rights reserved,
Printed in Malaysia @ WT92500
When AV3, AV4, AUDIO I or AUDIO2 is selected as the
input source, a video signal input from an external
component connected to the HDMI1-4, AVI-6 or V-AUX
jack can be output to the video monitor. This feature is
useful when you connect a component such as the
following.
Example 1: A game console that outputs an analog audio
signal and a video signal via component
video jacks.
Example 2: A set-top box that does not output an audio
signal at the HDMI output jack.
To connect such a component, do the following
connection/setting.
Part 1: Connecting an external component
Part 2: Assigning the video input jacks
• HDMI jacks: Connect the HDMI output jack of the
external component to the available HDMI jack of this
unit (see next section).
• Audio output jacks: Connect the audio output jacks of
the external component to the AV3-4 or AUDIO 1-2
audio input jacks.
• Video output jacks: Connect the video output jacks of
the external component to the AV 1-6 or VIDEO AUX
video input jacks.
• Video connection
Output jacks on the
connected source Jacks of this unit
component
Component video output AVI (TV)
Composite video output
AV2
AV3 (CD)
AV4
AV5
AV6
VIDEO AUX
(Front panel)
AV5
COMPONENT
VIDEO
COMPONENT
VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
S-Video output S-VIDEO*
'_Some models only.
• lithe video monitor is connected to this unil via an analog video
connection (component video or composite video connection), cnnnecl
the external component lo this unit via lhe same analog connection.
Continues to the back side _)
• Make sure that this unil and olher components are unphlgged lrom file
AC wall oullels.
• HDMI and audio connection
Audio output jacks
on the connected
source component
Analog audio output
AUD]OI
AUDIO2
AV3 (CD)
AV4
Input sources/
jacks of this unit
AUDIO
AUDIO
COAXIAL
OPTICAL
Available
HDMI
jack
HDMI 1
HDMI2
HDMI3
HDMI4
Coaxial digital output
Optical digital output
• Audio connection
Output jacks on the
connected source Input sources/jacks of this unit
component
Coaxial digital output
Optical digital output
Analog audio output
AV3 (CD) COAXIAL
AV4 OPTICAL
AUDIO 1 AUDIO
AUDIO2 AUDIO
1En
To Next Page
Need help?
General