Why Yamaha MCR-B142 Stereo System alarm does not sound?
If the alarm on your Yamaha Stereo System isn't sounding, the unit might be set to power saving mode. In the option menu, set POWER SAVING to NORMAL.
Why does my Yamaha MCR-B142 Stereo System make no sound?
There are several reasons why your Yamaha Stereo System might not be producing sound. First, check that the volume isn't set too low or muted. Ensure you've selected the correct source. Also, verify that the speaker connections are secure and that no headphones are plugged in. Finally, if you're using an external device, make sure its volume is turned up.
What causes the clock setting to be cleared on my Yamaha MCR-B142 Stereo System?
If the clock setting on your Yamaha Stereo System has been cleared, it's likely because the unit was left for about one hour with the power cable disconnected from the wall outlet. Plug the power cable into the wall outlet firmly, and set the clock again.
Why Yamaha MCR-B142 Stereo System cannot make this unit paired with the other component?
If your Yamaha Stereo System cannot pair with another component, the other component may not support A2DP. Perform pairing operations with a component which supports A2DP. If you are using a Bluetooth adapter, make sure its password is “0000.” Also, the two units may be too far apart, so move the other component closer. Finally, move the unit away from devices emitting radio-frequency signals.
Why Yamaha MCR-B142 Stereo System cannot tune into any DAB stations?
Your Yamaha Stereo System may not be able to tune into DAB stations if the initial scan operations were not performed. Perform the initial scan operations. Also, there may be no DAB coverage in your area, or the DAB signals may be too weak. Try changing the height, direction, or placement of the antenna.
How to fix weak DAB station reception on my Yamaha MCR-B142 Stereo System?
If the DAB station reception on your Yamaha Stereo System is weak, it's likely due to weak DAB signals. Try changing the height, direction, or placement of the antenna.
Why does my Yamaha MCR-B142 Stereo System remote control not work properly?
If the remote control for your Yamaha Stereo System isn't working correctly, it might be operated outside its operational range. Also, direct sunlight or certain lighting may be interfering with the remote control signal receiver on the unit. Try changing the lighting or the unit's orientation. The battery may be worn out, so replace it with a new one. Finally, check for any obstacles between the remote control and the unit.
Why MP3/WMA file in the USB device does not play on Yamaha Stereo System?
If your Yamaha Stereo System isn't playing MP3/WMA files from your USB device, the USB device might not be recognized. Try turning the system off and then reconnecting the USB device. It's also possible that the USB device does not contain playable files. Ensure that the USB device contains playable files.
What to do if my Yamaha MCR-B142 turns the system off unexpectedly?
The automatic system-off function may be enabled on your Yamaha Stereo System. This function turns off the system automatically when the time specified for AUTO POWER OFF in the option menu has elapsed or when 60 minutes have passed without any operation after stopping USB device or CD playback.
What to do if sound is cracked/distorted or there is abnormal noise on Yamaha MCR-B142 Stereo System?
If you are experiencing cracked or distorted sound, or abnormal noise from your Yamaha Stereo System, it could be due to excessive volume from the input source or the unit itself, especially the bass. Try adjusting the volume using the VOLUME control. If you are using an external device, lower its volume.
General| Bass reflex | Yes |
|---|---|
| Speaker type | - |
| Frequency range | 50 - 20000 Hz |
| RMS rated power | 30 W |
| Woofer diameter | 110 mm |
| Total Harmonic Distortion (THD) | 0.07 % |
| Subwoofer driver diameter (imperial) | 4.5 \ |
| Type | Home audio micro system |
| Cassette deck | No |
| Product color | Yellow |
| Number of optical discs | 1 discs |
| Disc types supported | CD |
| Playback disc formats | CD audio |
| Audio formats supported | MP3, WMA |
| Supported radio bands | FM |
| Preset stations quantity | 30 |
| Bluetooth version | 2.1+EDR |
| Speaker depth | 250.5 mm |
| Speaker power | 15 W |
| Speaker width | 129 mm |
| Speaker height | 125.5 mm |
| Apple docking compatibility | iPad, iPhone, iPod |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
Connect the supplied speakers and DAB/FM antenna to the unit for audio and broadcast reception.
Connect your iPod to the iPod dock on the top panel for playback and charging.
Connect your iPad or USB device to the front panel USB port for playback and charging.
Connect external audio devices via the 3.5 mm mini-plug cable to the AUX jack.
Identifies and explains the functions of buttons and indicators on the unit's top and front panels.
Details the buttons and their functions on the included remote control for system operation.
Set the unit's clock by copying the time from a connected iPod via the dock.
Manually set the date and time for the unit's clock using the front panel controls.
Connect and play music from your iPod using the dock or USB port.
Learn how to use repeat and shuffle playback modes for your iPod music.
Insert and play audio or data CDs, controlling playback with the remote or unit.
Connect and play music files from a USB device, controlling playback via remote or unit.
Register your Bluetooth device with the unit for wireless audio streaming.
Connect and play music wirelessly from your paired Bluetooth device.
Connect the antenna and perform an initial scan to set up DAB radio reception.
Tune into DAB stations using the remote control and view station information.
Store up to 30 favorite DAB stations for quick access using the preset function.
Recall and listen to your stored favorite DAB stations using the preset buttons.
Tune into FM radio stations using automatic or manual tuning methods.
Store up to 30 favorite FM stations using auto preset or manual preset.
Connect external audio devices via the AUX jack for playback.
Access and adjust various system settings like dimmer, EQ, power saving, and clock/alarm.
Set the unit to automatically turn off after a specified period.
Configure alarm settings including time, type, source, and volume for IntelliAlarm.
Turn the alarm function on or off and understand how it operates.
Solutions for common problems like no sound, sudden shut-off, or display issues.
Resolve issues related to iPod connection, charging, and playback detection.
Address problems with disc insertion, compatibility, and playback errors.
Troubleshoot issues with USB device recognition, file playback, and power.
Resolve problems with pairing, connection, and sound interruption for Bluetooth.
Troubleshoot issues with tuning, signal strength, and information display for DAB.
Address noise, weak signals, and distorted sound during FM reception.
Troubleshoot issues with the remote control's operation and range.
Details compatible CD formats, handling precautions, and playback limitations.
Specifies compatible USB devices, formats, and connection restrictions.
Lists technical details for the iPod, iPhone, iPad, CD, and Amplifier sections.
Details specifications for the Tuner, Speaker, USB, and Bluetooth sections.
To Next Page
