PRE-OPERATION CHECKS
4-3
1
2
3
4
5
6
7
8
9
Wheels and tires
●
Check for damage.
●
Check tire condition and tread depth.
●
Check air pressure.
●
Correct if necessary.
6-24, 6-26
Brake levers
●
Make sure that operation is smooth.
●
Lubricate lever pivoting points if necessary.
6-31
Centerstand, sidestand
●
Make sure that operation is smooth.
●
Lubricate pivots if necessary.
6-32
Chassis fasteners
●
Make sure that all nuts, bolts and screws are properly tightened.
●
Tighten if necessary.
—
Instruments, lights, signals
and switches
●
Check operation.
●
Correct if necessary.
—
Sidestand switch
●
Check operation of ignition circuit cut-off system.
●
If system is defective, have Yamaha dealer check vehicle.
3-15
ITEM CHECKS PAGE
To Next Page