PERIODIC MAINTENANCE AND MINOR REPAIR
6-39
2
3
4
5
6
7
8
9
EAU38221
Replacing a front turn signal
light bulb
1. Place the scooter on the center-
stand.
2. Remove cowlings A and B. (See
page 6-8.)
3. Remove the bolts, washers, and
well nuts.
4. Pull the rubber cover off as shown.
5. Disconnect the coupler shown,
and then remove the multi-function
display unit by pulling it out.
6. Remove the screws and then pull
the panel off as shown.
7. Remove the front turn signal light
unit by removing the screws.
8. Remove the socket (together with
the bulb) by turning it counter-
1. Bolt
2. Washer
3. Well nut
3
2
1
1
2
3
1. Rubber cover
1. Coupler
2. Multi-function display unit
1
2
1
1. Screw
2. Panel
1. Front turn signal light unit
2. Screw
To Next Page