Yamaha MOXF8 Reference Manual

PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILEVOICE
MOXF6/MOXF8 Reference Manual
Performance Mode
Performance Play
[F1] PLAY
[F2] VOICE
[F3] PORTA
[F4] EG
[F5] ARP ED
[F6] EFFECT
Arpeggio Edit
[F1] COMMON
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
[F6] OUT CH
Performance Edit
Common Edit
[F1] GENERAL
[F2] OUT/MFX
[F3] MEQ
[F4] USB I/O
[F5] A/D IN
[F6] EFFECT
Part Edit
[F1] VOICE
[F2] OUTPUT
[F3] EQ
[F4] TONE
[F5] RCV SW
Performance Job
[F1] INIT
[F2] RECALL
[F3] COPY
[F4] BULK
Performance Record
[F1] SETUP
[F2] REC TR
[F3] OTHER
[F5] CLICK
[F6] INFO
Supplementary Information
71
[SF2] VOICE
This convenient operation lets you copy Effect and Master
EQ settings of a certain Voice assigned to a certain
Performance to the Common parameters of the currently
edited Performance. This would come in handy when a
certain Performance has settings that you want to use in your
Performance program.
NOTE
When this display is shown, you can hear the original sound
at the copy source by pressing the [EDIT] to call up the
Compare mode. Pressing the [EDIT] button again will exit
from the Compare mode.
1 Source Voice
Determines the Bank and the Voice number to be copied.
Settings: Bank: PRE1 – 9, USR1 – 3, PDR, UDR, GM, GMDR
Voice Number: 001(A01) – 128 (H16)
2 Determines which Effect units are copied
This convenient operation lets you copy Effect and Master EQ settings of a certain Voice assigned to a certain
Performance to the currently edited Performance. You can select Effect units to be copied from “Rev,” “Cho,” “MEQ,”
and “MFX.”
NOTE
Even when each of the Reverb and Chorus is set to “on,” executing the Job does not copy the Send Level from the Voice to the
Performance. If you want to apply the same depth of the Reverb and Chorus as in the Voice mode to the copied Voice, manually
set the Reverb Send and Chorus Send in the OUTPUT display (page 66) of the Performance Part Edit to the same value as in
Voice Edit.
This function lets you send all your edited parameter settings for the currently selected performance to a computer or
another MIDI device for data archiving. Press the [ENTER] button to execute Bulk Dump.
NOTE
In order to execute Bulk Dump, you will need to set the correct MIDI Device Number, with the following operation: [UTILITY] 
[F6] MIDI  [SF1] CH  “DeviceNo.”
[F4] BULK (Bulk Dump)
1
2

Yamaha MOXF8 Specifications

General

Product type	Digital synthesizer
Product color	Black
Sound effects	Chorus, Reverberation
Tap tempo switch	Yes
Chorus effects quantity	22
Keyboard number of keys	88
Maximum polyphony (notes)	124
Reverberation effects quantity	9
Power source type	DC
Display type	LCD
Headphone outputs	1

Weight and Dimensions

Depth	405 mm
Width	1320 mm
Height	168 mm
Weight	14900 g