PERIODIC MAINTENANCE AND MINOR REPAIR
6-31
6
6. Install the license plate light cover
by installing the screws.
EAU36840
Replacing an auxiliary light
bulb
This model is equipped with three aux-
iliary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the headlight unit by re-
moving the bolts on each side.
N
TE:
Skip steps 2 and 7 if the auxiliary light
bulb A is being replaced.
2. To replace auxiliary light bulb B or
C, remove the corresponding
headlight unit side cover bracket
and the headlight unit side cover
by removing the screws.
1. Auxiliary light bulb A
2. Auxiliary light bulb B
3. Auxiliary light bulb C
1. Bolt
U5YU23E0.book Page 31 Friday, November 23, 2007 8:49 AM
To Next Page
Loading...
