EasyManua.ls Logo

Yamaha MT01X - Multi-Function Display

Yamaha MT01X
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTRUMENT AND CONTROL FUNCTIONS
3-5
3
When the key is turned to OFF and 30
seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
This model is also equipped with a self-
diagnosis device for the immobilizer
system. (See page 3-7 for an explana-
tion of the self-diagnosis device.)
EAU36943
Multi-function display
WARNING
EWA12421
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit.
The multi-function display is equipped
with the following:
a speedometer (which shows the
riding speed)
a tachometer (which shows engine
speed)
an odometer (which shows the to-
tal distance traveled)
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
a clock
a self-diagnosis device
a brightness control mode
NOTE:
Be sure to turn the key to ON before
using the SELECT and RESET but-
tons except for setting the brightness
control mode.
1. Clock
2. RESET button
3. Tachometer
4. SELECT button
5. Speedometer
6. Odometer/tripmeter/fuel reserve tripmeter
U5YU23E0.book Page 5 Friday, November 23, 2007 8:49 AM

Table of Contents

Related product manuals