Yamaha MT09 - Page 28

Instrument and control functions
3-13
1
2
3
4
5
6
7
8
9
10
11
12
 “AVE_ _._ L/100 km”: The average
amount of fuel necessary to travel
100 km is shown.
 “AVE_ _._ MPG” (for the UK): The
average distance that can be trav-
eled on 1.0 Imp.gal of fuel is
shown.
To switch between the average fuel
consumption display settings, push the
“SELECT” button for one second.
To reset the average fuel consumption,
push the “RESET” button for one sec-
ond.
TIP
After resetting the average fuel con-
sumption, “_ _._” will be shown until the
vehicle has traveled 1 km (0.6 mi).
Coolant temperature mode
This display shows the coolant temper-
ature from 40 C to 116 C in 1 C incre-
ments.
If the message “HI” flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 6-45.)
TIP
 When the coolant temperature is
below 40 C, “LO” will be dis-
played.
 The coolant temperature varies
with changes in the weather and
engine load.
Air intake temperature mode
The air intake temperature display indi-
cates the temperature of the air drawn
into the air filter case.
This display shows the air intake tem-
perature from –9 C to 99 C in 1 C in-
crements.
TIP
 –9 C will be displayed even if the
air intake temperature falls below
–9 C.
 The air intake temperature may
vary from the ambient tempera-
ture.
1. Coolant temperature display
1
1. Air intake temperature display
1
B87-9-E0_1.book 13 ページ ２０１５年１２月１６日 水曜日 午前１０時２１分