For your safety – pre-operation checks
6-2
6
Rear brake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
8-19, 8-20
Clutch
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
8-18
Throttle grip • Check for smooth rotation and automatic return. 8-25
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
8-24
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
8-22, 8-24
Wheels and tires
•Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
8-15, 8-17
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
8-25
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
8-26
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
8-26
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
ITEM CHECKS PAGE
UBAM10E0.book Page 2 Wednesday, November 4, 2020 11:05 AM
To Next Page
Loading...
