EasyManua.ls Logo

Yamaha MX250 2016 - Before Operation; Fuel

Yamaha MX250 2016
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Before operation
Preparation
Fuel
1. Stop the engine.
2. Place the multi-purpose engine on a level surface.
3. Remove the fuel tank cap.
4. Check the fuel level.
5. If low, fill the tank with fuel. Do not fill past the bot-
tom of the fuel filler as fuel may mix with the acti-
vated charcoal in the fuel tank cap and overflow.
TIP
If filled beyond the bottom of the fuel filler, fuel may mix
with the active charcoal located within the fuel tank cap
and soil the surrounding areas.
Fuel is highly flammable and poisonous.
Check “Safety information” (See page 1) care-
fully before filling.
Carefully fill the fuel tank in order to avoid fuel
from spilling out of the fuel tank.
Stop filling when the fuel reaches the bottom of
the fuel filler, otherwise it may overflow when the
fuel warms up and expands.
Wipe up any spilled fuel immediately.
After filling the tank with fuel, make sure the fuel
tank cap is tightened securely.
WARNING
7VE-F8199-70-E0.book 11 ペー 2016年11月15日 火曜日 午後5時35分
Downloaded from ManualsNet.com search engine

Table of Contents

Related product manuals