IV
Speaker cables
Subwoofer cable
Fasteners (for NX-C430)
Nonskid pads (for YST-SW015)
Main and rear speakers
(and rear center speaker for NS-P436)
Center speaker
Subwoofer
UNPACKING Please check to make sure all listed items are included.
[4m]
[15m]
X 2
X 3
NX-430P
NX-C430
YST-SW015
X 2
<NS-P430>
X 3
<
NS-P436>
X 4
<NS-P430>
X 5
<NS-P436>
SUBWOOFER SYSTEM YST-SW015
STANDBY/ON B.A.S.S. HIGH CUT
50
–
150Hz
VOLUME
0
–
10
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED. Making sure that neither core is
connected to the earth terminal of the three pin plug.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
For Canadian Customers
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
NS-P430-436(UB)-PREc 03.2.28, 7:02 PM4
To Next Page
Loading...
Need help?
General
