Yamaha ProR3 - Reverb + Symphonic (Rev + Sym)

24 Advanced uses (2) – Editing functions –
ProR3 Digital Reverberator
Reverb + Symphonic (Rev + Sym)
Key Parameter Value Description
MAIN
REV RevTime 0.3 ~ 99.0 s
Refer to “Reverberation” items on page 18
REV IniDelay 0.1 ~ 200.0 ms
REV HighRatio X0.1 ~ X1.0
REV LowRatio X0.1 ~ X2.4
REV Diffusion 0 ~ 10
SYM Mod Freq 0.05 ~ 40.00 Hz Symphonic modulation frequency
SYM Depth 0 ~ 100% Symphonic modulation depth
FINE
SYM/REV Balance *1
*1 Only when REV Patch is parallel (Reverb + Symphon)
0/100 ~ 100/0 Level balance of reverb and symphonic
REV Rev Mix *2
*2 Only when REV Patch is serial (Reverb → Symphon, Symphon → Reverb)
0 ~ 100% Reverb amount
REV Reverb Type *3
*3 Hall, Room, Vocal, Plate
Type of reverb tone
REV Density 0 ~ 100 Density of reverb
REV HPF Thru, 40 Hz ~ 1.0 kHz Cutoff frequency of reverb high pass filter
REV LPF 400 Hz ~ 20 kHz, Thru Cutoff frequency of reverb low pass filter
REV Space Mod 0 ~ 10 Modulation level of reverb
REV Patch *4
*4 Reverb + Symphon, Symphon → Reverb, Reverb → Symphon
Connection of symphonic and reverb
Common parameters Refer to “Common parameters” on page 27