Instrument and control functions
4-8
4
EAU40921
Seat
To remove the seat
1. Remove the mudguard by remov-
ing the bolts and washers.
2. Pull the seat off.
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
2. Place the seat in the original posi-
tion.
3. Install the mudguard by installing
the washers and bolts.
Make sure that the seat is properly se-
cured before riding.
1. Bolt and washer
2. Mudguard
1. Seat holder
2. Projection
U2SA14E0.book Page 8 Monday, May 1, 2017 10:19 AM
To Next Page
Loading...
