Need help?Do you have a question about the Yamaha R-N1000A and is the answer not in the manual?
General| Rated Output Power | 100 W + 100 W (8 ohms, 20 Hz-20 kHz, 0.07% THD) |
|---|---|
| Subwoofer Out | Yes |
| Pure Direct | Yes |
| ToP-ART | Yes |
| Phono Input | Yes (MM) |
| Headphone Output | Yes |
| Frequency Response | 5 Hz-100 kHz (+0 dB/-3 dB) |
| Signal-to-Noise Ratio | 110 dB (CD) |
| Audio In | 4 x RCA |
| Digital Input | Optical, Coaxial |
| Network Section | Wi-Fi, Ethernet, MusicCast |
| Bluetooth | Yes (SBC, AAC) |
| USB Input | Yes |
| Standby Power Consumption | 0.1 W |
| DAC | ES9026PRO |
| Wi-Fi | Yes (2.4 GHz / 5 GHz) |
| Input Sensitivity/Impedance | 200 mV / 47 k-ohms |
| Total Harmonic Distortion | 0.07 % (20 Hz - 20 kHz, 50 W, 8 ohms) |
| Digital Inputs | Optical x 2, Coaxial x 2 |
| Analog Inputs | RCA |
Confirm all included accessories are present before setup.
List additional items needed for setup and operation.
Step-by-step instructions for connecting speakers to the receiver.
Instructions on positioning the wireless antenna for optimal signal.
Guide on connecting the main power cord to the unit.
How to power on the receiver and observe the initial display.
Detailed steps for the YPAO automatic speaker setup process.
Guide to setting up wireless network connectivity using the MusicCast app.
How to select and play Internet radio stations via the app.
To Next Page
