Need help?Do you have a question about the Yamaha R-N303D and is the answer not in the manual?
General| Impedance | 8 Ω |
|---|---|
| Receiver type | - |
| RMS rated power | 200 W |
| Input sensitivity | 500 mV |
| Audio output channels | - channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 10 % |
| Dynamic power per channel (2 Ohm) | 180 W |
| Dynamic power per channel (3 Ohm) | 115 W |
| Dynamic power per channel (4 Ohm) | 165 W |
| Dynamic power per channel (6 Ohm) | 150 W |
| Dynamic power per channel (8 Ohm) | 125 W |
| Power output per channel (1KHz@8 Ohm) | 140 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Audio (L/R) in | 6 |
| Digital audio optical in | 1 |
| Audio formats supported | AAC, AIFF, ALAC, DSD, FLAC, MP3, WAV, WMA |
| Video formats supported | MPEG4 |
| Headphone out | Yes |
| Product color | Black |
| Supported radio bands | DAB, DAB+ |
| Preset stations quantity | 40 |
| Internet radio services supported | Deezer, JUKE, Napster, Qobuz, Spotify, Tidal |
| 3D | No |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 1.8 W |
| Certification | CE |
Weight and Dimensions| Depth | 340 mm |
|---|---|
| Width | 435 mm |
| Height | 141 mm |
| Weight | 7200 g |
Instructions for connecting various audio and external devices to the unit.
Guide for connecting the unit to a router using a network cable for wired connection.
Methods for connecting the unit to a network, including wireless and wired options.
Guide on tuning, improving reception, and using preset functions for FM/AM radio.
Instructions for tuning, scanning, and managing DAB radio stations.
Steps for pairing, connecting, and playing audio from Bluetooth devices.
Guide on setting up media sharing and playing music files from PCs or NAS.
Adjusting settings like Volume Trim, Signal Info, and Volume Interlock during playback.
Detailed guide on configuring network, Bluetooth, volume, and auto-standby settings.
Procedures for checking firmware, remote control ID, tuner frequency, and restoring defaults.
To Next Page
