Why Yamaha Receiver files on the PC (server) cannot be viewed or played back?
If the files on the PC (server) cannot be viewed or played back on your Yamaha Receiver, the file format may not be compatible with the unit or the PC (server). Use a file format that is compatible with both the unit and the PC.
Why is my Yamaha Receiver remote control not working?
If the Yamaha Receiver's remote control isn't working, make sure you're within a 6-meter range and within 30 degrees of the front panel. Reposition the unit if direct sunlight or strong lighting is interfering with the remote sensor. If that doesn't work, replace all the batteries in the remote.
Why my Yamaha R-N803 Receiver cannot connect to a Bluetooth device?
If your Yamaha Receiver won't connect to a Bluetooth device, first ensure that the Bluetooth function is enabled in the 'Setup' menu. If it is already connected to another device, disconnect from that device first. Make sure the Bluetooth device is close to the receiver and that no devices emitting electromagnetic waves are nearby. Check that your Bluetooth device supports the A2DP protocol. If problems persist, delete the connection profile on your Bluetooth device and reconnect, or ensure the passkey is set to '0000'.
Why Yamaha Receiver has no sound or sound cuts off intermittently via Bluetooth?
If you're experiencing intermittent sound or no sound via Bluetooth on your Yamaha Receiver, increase the volume on the Bluetooth device. Ensure the sound output on the Bluetooth device is set to this unit. If the connection is cut off, try reconnecting. Also, make sure the Bluetooth device is close to the Yamaha Receiver and that there are no devices emitting electromagnetic waves nearby.
What to do if firmware update via the network is failed on my Yamaha R-N803?
If a firmware update fails via the network on your Yamaha Receiver, try connecting again after a while. You can also use a USB storage device to update the firmware.
What to do if Yamaha Receiver cannot detect the PC (server)?
If your Yamaha Receiver cannot detect the PC (server), the media sharing settings on the PC (server) might be incorrect. Adjust the media sharing settings to allow the unit to access the folder on the PC (server).
How to troubleshoot the network function on a Yamaha R-N803 Receiver?
If the network function on your Yamaha Receiver isn't working, make sure the network information (IP address) has been properly acquired. Enable the DHCP server function on your router and set 'DHCP' to 'On' in the 'Setup' menu on the unit. If configuring manually, ensure the unit's IP address is different from other devices on the network.
What to do if Yamaha R-N803 Receiver does not detect the USB storage device?
If your Yamaha Receiver isn't detecting the USB storage device, first, turn off the unit, reconnect the USB device securely, and then turn the unit back on. Also, ensure that the file system of the USB storage device is formatted as FAT16 or FAT32.
Why Yamaha R-N803 Receiver cannot tune into any DAB stations?
If you cannot tune into any DAB stations with your Yamaha Receiver, ensure that the initial scan has been performed. If the signal is weak, try changing the antenna height, direction, or placement. Also, verify that there is DAB coverage in your area.
Why is the sound level low on my Yamaha R-N803 Receiver?
If the sound level is low on your Yamaha Receiver, the loudness control function may be active. Try turning down the volume, setting the LOUDNESS control to the FLAT position, and then adjusting the volume again.
Guidelines for safe use and handling of the power cord and plug to prevent shocks or fires.
Precautions against water, fire hazards, and warnings against disassembling the unit.
Safety guidelines for batteries, wireless units, and handling unit abnormalities.
Safe installation, ventilation, hearing safety, and advice to prevent hearing loss.
Guidance on secure outlets, plug insertion, and careful handling of controls.
Advice on cleaning the unit and safety guidelines for batteries.
Notices on power saving, environmental protection, and unit cleaning.
Notices on network interference, unit handling, and manual content.
Description of unit features and diagram of supported playback sources.
List of accessories such as remote control, antennas, microphone, cables, and manuals.
Explanation of power button, indicators, display, and dimmer functions.
Buttons for selecting input sources, radio bands, tuning, and presets.
Ports for headphones, microphone, and speaker connections.
Buttons for selecting input sources and adjusting bass, treble, and balance.
Controls for adjusting volume, loudness, and navigating menus.
Displays input status, network, Bluetooth, signal strength, and sleep timer.
Indicators for tuned radio stations, stereo reception, YPAO, and speaker output.
Ports for connecting analog (LINE, PHONO) and digital audio (OPTICAL, COAXIAL) devices.
Ports for network cable, antennas, AC power, and speaker connections.
Keys for selecting input sources, radio tuning, and managing presets.
Keys for controlling playback operations and adjusting volume.
Controls for unit power, sleep timer, and accessing the option menu.
Keys for controlling playback and instructions for installing remote control batteries.
Wiring diagrams for connecting various audio sources to the unit.
Diagrams for connecting speaker sets A and B.
Guidelines on speaker impedance and steps for connecting speaker cables.
Instructions for connecting speaker cables using banana plugs (specific models).
Explanation of bi-wiring and how to connect speakers for this method.
Instructions for connecting FM/AM and DAB/FM antennas.
Steps for assembling and connecting the AM antenna wires.
Connecting the unit via network cable and preparing the wireless antenna.
Steps for connecting the power cord and setting the voltage selector.
Notes on network setup and automatic configuration using iOS device settings.
Methods for connecting via MusicCast, iOS Wi-Fi, WPS, or manual setup.
Details on wired connection, DHCP, and Wireless Direct setup.
Steps to register the unit to the MusicCast network and configure wireless settings.
Step-by-step guide to connect using WPS and important notes on compatibility.
Steps to manually set SSID, security method, and security key for network connection.
Using the unit as an access point for direct mobile connection and configuration.
Procedure to verify the unit's connection status to the network.
Explanation of MusicCast and installing the CONTROLLER app.
Steps to operate the MusicCast CONTROLLER app for network setup and music playback.
How to select an input source and choose speaker sets A or B.
Using volume controls and BASS/TREBLE/BALANCE/LOUDNESS for sound adjustment.
Explanation of the PURE DIRECT function for high-fidelity sound.
How to use the BASS, TREBLE, and BALANCE controls to adjust sound.
How to use the LOUDNESS control to compensate for low-volume frequency loss.
Instructions for setting the sleep timer to automatically switch the unit to standby.
Steps to tune FM/AM stations and improve FM reception via mono mode.
Information on registering up to 40 radio stations as presets.
Steps to tune and register a specific radio station manually.
How to recall and clear registered radio stations from presets.
How to tune to RDS stations and display program service, type, and text.
Explanation of DAB benefits and requirement to perform an initial scan.
How to select a DAB station from the scanned list.
Steps to register and recall DAB stations using preset numbers.
How to display DAB information like service label and check reception strength.
Steps for pairing a Bluetooth device with the unit for the first time.
How to play music from a connected Bluetooth device.
Procedure to establish and disconnect the Bluetooth connection.
How AirPlay allows playback of iPhone/iTunes music over the network.
Warning about adjusting volume on iTunes/iPhone to prevent damage.
Procedure to connect USB device and play back music files.
Configuring playback modes and auto playback for USB contents.
Playing music from PC/NAS and setting up media sharing.
How to select and play music files from a PC or NAS.
Configuring playback modes and auto playback for PC music.
Listening to stations worldwide and controlling playback.
How AirPlay works and a caution regarding volume adjustment.
Procedure to connect USB device and play back music files.
Explanation of YPAO and steps for preparing the unit for measurement.
How to access and use the Option menu for playback adjustments.
Instructions for placing the microphone at the listening position and connecting it.
Steps to start the measurement, save results, or cancel.
List of error messages, their causes, and remedies during YPAO measurement.
List of warning messages, their causes, and remedies during YPAO measurement.
Procedure to enter the Setup menu and navigate its options.
Configuring network connections and Bluetooth functions.
Enabling/disabling YPAO features and configuring volume settings.
Setting auto standby time and enabling eco mode for power saving.
Configuring network connections and viewing network status details.
Checking firmware version and adjusting speaker impedance settings.
Setting remote control ID and tuner frequency step.
Procedure to restore all unit settings to their default values.
Instructions for updating the unit's firmware via the network.
Important notices and notifications about available firmware updates.
Step-by-step guide to download and install firmware updates.
Troubleshooting for power, sound, speaker, and cable connection problems.
Troubleshooting for remote control malfunctions and FM/AM/DAB reception problems.
Resolving Bluetooth connection errors and sound interruption problems.
Troubleshooting USB device detection, network connection, and Internet radio issues.
Troubleshooting DAB signal issues and PC server/Internet radio playback problems.
Resolving AirPlay detection, mobile app issues, and router connection failures.
Troubleshooting for access denied, USB/iPod errors, and playback issues.
Resolving issues with waiting for connection, unable to play, or version errors.
List of compatible Bluetooth devices and USB storage device requirements.
Table listing supported audio file formats and their specifications.
Details on network interface, Bluetooth, audio output, and tone controls.
Specifications for FM/AM/DAB radio, power, dimensions, and weight.
Power consumption details for standby and network standby modes.
Information on proper disposal of electrical products and batteries.
Guidelines for safe use and handling of the power cord and plug to prevent shocks or fires.
Precautions against water, fire hazards, and warnings against disassembling the unit.
Safety guidelines for batteries, wireless units, and handling unit abnormalities.
Safe installation, ventilation, hearing safety, and advice to prevent hearing loss.
Guidance on secure outlets, plug insertion, and careful handling of controls.
Advice on cleaning the unit and safety guidelines for batteries.
Notices on power saving, environmental protection, and unit cleaning.
Notices on network interference, unit handling, and manual content.
Description of unit features and diagram of supported playback sources.
List of accessories such as remote control, antennas, microphone, cables, and manuals.
Explanation of power button, indicators, display, and dimmer functions.
Buttons for selecting input sources, radio bands, tuning, and presets.
Ports for headphones, microphone, and speaker connections.
Buttons for selecting input sources and adjusting bass, treble, and balance.
Controls for adjusting volume, loudness, and navigating menus.
Displays input status, network, Bluetooth, signal strength, and sleep timer.
Indicators for tuned radio stations, stereo reception, YPAO, and speaker output.
Ports for connecting analog (LINE, PHONO) and digital audio (OPTICAL, COAXIAL) devices.
Ports for network cable, antennas, AC power, and speaker connections.
Keys for selecting input sources, radio tuning, and managing presets.
Keys for controlling playback operations and adjusting volume.
Controls for unit power, sleep timer, and accessing the option menu.
Keys for controlling playback and instructions for installing remote control batteries.
Wiring diagrams for connecting various audio sources to the unit.
Diagrams for connecting speaker sets A and B.
Guidelines on speaker impedance and steps for connecting speaker cables.
Instructions for connecting speaker cables using banana plugs (specific models).
Explanation of bi-wiring and how to connect speakers for this method.
Instructions for connecting FM/AM and DAB/FM antennas.
Steps for assembling and connecting the AM antenna wires.
Connecting the unit via network cable and preparing the wireless antenna.
Steps for connecting the power cord and setting the voltage selector.
Notes on network setup and automatic configuration using iOS device settings.
Methods for connecting via MusicCast, iOS Wi-Fi, WPS, or manual setup.
Details on wired connection, DHCP, and Wireless Direct setup.
Steps to register the unit to the MusicCast network and configure wireless settings.
Step-by-step guide to connect using WPS and important notes on compatibility.
Steps to manually set SSID, security method, and security key for network connection.
Using the unit as an access point for direct mobile connection and configuration.
Procedure to verify the unit's connection status to the network.
Explanation of MusicCast and installing the CONTROLLER app.
Steps to operate the MusicCast CONTROLLER app for network setup and music playback.
How to select an input source and choose speaker sets A or B.
Using volume controls and BASS/TREBLE/BALANCE/LOUDNESS for sound adjustment.
Explanation of the PURE DIRECT function for high-fidelity sound.
How to use the BASS, TREBLE, and BALANCE controls to adjust sound.
How to use the LOUDNESS control to compensate for low-volume frequency loss.
Instructions for setting the sleep timer to automatically switch the unit to standby.
Steps to tune FM/AM stations and improve FM reception via mono mode.
Information on registering up to 40 radio stations as presets.
Steps to tune and register a specific radio station manually.
How to recall and clear registered radio stations from presets.
How to tune to RDS stations and display program service, type, and text.
Explanation of DAB benefits and requirement to perform an initial scan.
How to select a DAB station from the scanned list.
Steps to register and recall DAB stations using preset numbers.
How to display DAB information like service label and check reception strength.
Steps for pairing a Bluetooth device with the unit for the first time.
How to play music from a connected Bluetooth device.
Procedure to establish and disconnect the Bluetooth connection.
How AirPlay allows playback of iPhone/iTunes music over the network.
Warning about adjusting volume on iTunes/iPhone to prevent damage.
Procedure to connect USB device and play back music files.
Configuring playback modes and auto playback for USB contents.
Playing music from PC/NAS and setting up media sharing.
How to select and play music files from a PC or NAS.
Configuring playback modes and auto playback for PC music.
Listening to stations worldwide and controlling playback.
How AirPlay works and a caution regarding volume adjustment.
Procedure to connect USB device and play back music files.
Explanation of YPAO and steps for preparing the unit for measurement.
How to access and use the Option menu for playback adjustments.
Instructions for placing the microphone at the listening position and connecting it.
Steps to start the measurement, save results, or cancel.
List of error messages, their causes, and remedies during YPAO measurement.
List of warning messages, their causes, and remedies during YPAO measurement.
Procedure to enter the Setup menu and navigate its options.
Configuring network connections and Bluetooth functions.
Enabling/disabling YPAO features and configuring volume settings.
Setting auto standby time and enabling eco mode for power saving.
Configuring network connections and viewing network status details.
Checking firmware version and adjusting speaker impedance settings.
Setting remote control ID and tuner frequency step.
Procedure to restore all unit settings to their default values.
Instructions for updating the unit's firmware via the network.
Important notices and notifications about available firmware updates.
Step-by-step guide to download and install firmware updates.
Troubleshooting for power, sound, speaker, and cable connection problems.
Troubleshooting for remote control malfunctions and FM/AM/DAB reception problems.
Resolving Bluetooth connection errors and sound interruption problems.
Troubleshooting USB device detection, network connection, and Internet radio issues.
Troubleshooting DAB signal issues and PC server/Internet radio playback problems.
Resolving AirPlay detection, mobile app issues, and router connection failures.
Troubleshooting for access denied, USB/iPod errors, and playback issues.
Resolving issues with waiting for connection, unable to play, or version errors.
List of compatible Bluetooth devices and USB storage device requirements.
Table listing supported audio file formats and their specifications.
Details on network interface, Bluetooth, audio output, and tone controls.
Specifications for FM/AM/DAB radio, power, dimensions, and weight.
Power consumption details for standby and network standby modes.
Information on proper disposal of electrical products and batteries.
General| Signal-to-Noise Ratio | 100 dB (CD) |
|---|---|
| Dimensions (W x H x D) | 435 x 151 x 392 mm |
| Network Connectivity | Ethernet, Wi-Fi |
| Bluetooth | Yes |
| Bluetooth Profile | A2DP, AVRCP |
| Bluetooth Audio Codec | SBC, AAC |
| Wi-Fi | Yes (2.4/5 GHz) |
| Weight | 11.0 kg |
| Inputs | Phono x1, Optical x2, Coaxial x2, USB x1 |
| Outputs | 1 x Subwoofer, 1 x Headphone |
| Tuner | FM/AM |
| USB Input | Yes |
| Total Harmonic Distortion | 0.015% (40 W, 8 ohms) |
To Next Page
