Need help?Do you have a question about the Yamaha RX-900U and is the answer not in the manual?
Essential safety precautions for operating the Yamaha RX-900U receiver, covering electrical, environmental, and usage hazards.
Diagram and instructions for proper antenna grounding to prevent electrical hazards and static charges.
Identifies all buttons, knobs, and indicators on the front panel of the receiver for easy operation.
Explains controls for power, volume, tone, loudness, and audio modes.
Describes controls for radio tuning, presets, and reception mode selection.
Guide to auto tuning, manual tuning, and preset station selection for radio listening.
Essential safety precautions for operating the Yamaha RX-900U receiver, covering electrical, environmental, and usage hazards.
Diagram and instructions for proper antenna grounding to prevent electrical hazards and static charges.
Identifies all buttons, knobs, and indicators on the front panel of the receiver for easy operation.
Explains controls for power, volume, tone, loudness, and audio modes.
Describes controls for radio tuning, presets, and reception mode selection.
Guide to auto tuning, manual tuning, and preset station selection for radio listening.
General| Power output | 125 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency response | 20Hz to 20kHz |
| Total harmonic distortion | 0.015% |
| Input sensitivity (MM) | 2.5 mV |
| Input sensitivity (line) | 150 mV |
| Signal to noise ratio (MM) | 80 dB |
| Signal to noise ratio (line) | 100 dB |
| Output | 150 mV (line) |
| Dimensions | 435 x 151 x 404.5mm |
| Weight | 12.5kg |
| Tuning range | FM: 87.5-108 MHz, AM: 530-1710 kHz |
| Channel separation | 60dB |
| Speaker load impedance | 8Ω to 16Ω |
To Next Page
