To Next PageTo Next PageWhat to do if Yamaha Receiver fails to turn on?
If your Yamaha Receiver fails to turn on or enters standby mode shortly after being powered on, consider the following: * Ensure the power cord is firmly connected. * Verify the impedance setting matches your speakers. * Check speaker wire connections for shorts. * If exposed to a strong electric shock, put the unit in standby mode, disconnect the power cord, wait 30 seconds, and reconnect.
General| Channels | 6.1 |
|---|---|
| Signal-to-Noise Ratio | 100 dB |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| Audio D/A Converter | 24-bit/192 kHz |
| Surround System Class | 6.1 channel |
| Digital Sound Processor (DSP) | Yes |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| Frequency Response | 10Hz-100kHz |
| Total Harmonic Distortion | 0.06 % |
| Inputs | 4 x Audio |
| Outputs | 1 x Audio (RCA), 1 x Video (Composite) |
| Built-in Decoders | Dolby Digital, DTS |
| Surround Sound Effects | Dolby Pro Logic II |
| Tuning Range | FM: 87.5 - 108 MHz |
| Connector Type | RCA |
| Amplifier Output Details | 85 W (Front), 85 W (Center), 85 W (Surround), 85 W (Surround Back) |
| DSP Presets | 7ch stereo, Concert hall, Disco, Game, Jazz club, Movie, Stadium |
Specific safety and wiring instructions for UK models.
Lists all components included in the product package.
Step-by-step guide for powering the remote control unit.
Description of buttons, jacks, and indicators on the receiver's front.
Explanation of how to operate the unit using the remote control.
Diagram and explanation of the rear panel connections and terminals.
Guidelines for optimal placement and connection of speakers.
Steps for linking video sources like DVD players and TVs.
Steps for linking audio sources like CD players and tape decks.
Procedure for plugging the unit into a power outlet.
Step-by-step instructions for the automatic setup wizard.
Core procedures for turning on, selecting sources, and adjusting volume.
How to choose and apply different audio sound field effects.
Methods for finding and selecting radio stations.
How to store and recall favorite radio stations.
Important notes for recording digital audio formats like DTS.
Sound field options optimized for cinematic and video content.
Sound field options optimized for music playback.
How to set the unit to turn off automatically after a specified time.
Fine-tuning individual speaker volume levels for optimal balance.
Adjust speaker parameters, tone quality, and signal processing.
Reassign input jacks and select input modes for components.
How to program the remote to control other A/V devices.
Using the remote's input selector buttons to control different devices.
Guide to adjusting individual sound field program parameters.
Common issues and their remedies for the main unit.
Solutions for problems related to radio reception.
Solutions for issues with the remote control not functioning.
Explanations of digital audio technologies like Dolby Digital and DTS.
Definitions and descriptions of various sound field program types.
Detailed audio performance metrics and specifications.
Technical specifications related to video signal processing.
Technical specifications for the FM tuner.
