To Next PageTo Next PageWhat to do if Yamaha Receiver cannot tune in desired station?
If a desired station cannot be tuned in with the automatic tuning method on your Yamaha Receiver, tighten the AM loop antenna connections and rotate it for best reception. You can also use the manual tuning method.
General| Type | AV receiver |
|---|---|
| Channels | 5.1 |
| Total Harmonic Distortion | 0.04% |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity (MM) | 2.5 mV |
| Input Sensitivity (Line) | 150 mV |
| Signal-to-Noise Ratio (Line) | 100 dB |
| Preset Stations | 40 |
| Analog Audio Inputs | 6 |
| Analog Audio Outputs | 1 |
| Video Inputs | 3 |
| Video Connections | Composite |
| Video Outputs | 1 |
| Dimensions (W x H x D) | 435 x 150 x 380 mm |
| Weight | 8.5 kg |
| Speaker Load Impedance | 8 ohms |
| Tuner Section | FM/AM |
| Digital Inputs | 2 x Optical, 1 x Coaxial |
| Surround Sound Modes | Dolby Pro Logic |
Explanation of Yamaha's advanced digital sound processing technology.
Details on the built-in Dolby Pro Logic Surround decoder system.
Combination of Dolby Pro Logic and Yamaha DSP technology.
Describes 5-speaker and 4-speaker setups for optimal sound.
Guidance on positioning main, center, and rear speakers for best acoustics.
Instructions for connecting various audio and video components to the unit.
Guide to setting the impedance selector for speaker compatibility.
Detailed steps for connecting speaker wires to the main speaker terminals.
Detailed steps for connecting speaker wires to rear and center terminals.
Information on using output terminals to drive speakers with external amplifiers.
Instructions for setting the impedance selector based on speaker requirements.
Procedure to fine-tune the center speaker's output level.
Procedure to fine-tune the rear speakers' output level.
Overview of pre-programmed macro keys for sequential operations.
Guide to configuring the MACRO switch for SLOW, QUICK, or OFF modes.
Steps to clear a specific learned key function or macro.
Procedure to clear all learned functions and macros from the remote.
Detailed technical data for the audio output and processing sections.
