Need help?Do you have a question about the Yamaha SW-201 and is the answer not in the manual?
General| Driver | 8" cone |
|---|---|
| Amplifier Power | 100 W |
| Inputs | Line Level |
| Type | Active Subwoofer |
| Frequency Response | 28 Hz – 200 Hz |
Alerts users to the presence of uninsulated dangerous voltage and important operating instructions.
Details FCC compliance, modification warnings, and measures to eliminate interference.
Explains the technology for reproducing higher quality super-bass sound.
Provides guidance on optimal subwoofer placement for best bass effect.
Details how to connect the subwoofer using the amplifier's line output terminals.
Explains how to connect the subwoofer directly to the amplifier's speaker terminals.
Describes the power switch, indicator, AUTO STANDBY, HIGH CUT, and input/output terminals.
Guides users on setting the optimum volume and tone balance for the subwoofer.
Illustrates frequency response with HIGH CUT switch in HIGH and LOW positions.
Explains the Helmholtz resonator and negative-impedance drive principles behind the technology.
Provides solutions for common operational issues like no sound or low sound level.
To Next Page
