What to do if my Yamaha Subwoofer has no sound?
If your Yamaha Subwoofer isn't producing any sound, there are a couple of things to check: First, make sure the volume isn't set to the minimum; try raising it. Second, inspect all connections to ensure they are secure and complete.
What to do if the sound from my Yamaha NS-SW100 is interrupted?
If the sound from your Yamaha Subwoofer is being interrupted, it's likely that the volume is set too high, causing excessive output. Try reducing the volume level.
Why is the sound level too low on my Yamaha NS-SW100?
If the sound level from your Yamaha Subwoofer is too low, there could be a couple of reasons. One possibility is that the source sound you're playing doesn't have much bass frequency content; try playing a source with more bass. Another reason might be that the subwoofer's location is affected by standing waves. To address this, try repositioning the subwoofer or placing bookshelves (or similar items) along the walls to break up the parallel surfaces.
Why Yamaha NS-SW100 power is not supplied when the power switch is ON?
If your Yamaha Subwoofer isn't powering on even when the power switch is in the ON position, the most likely cause is that the power plug isn't securely connected. Ensure that the plug is properly connected.
Driver| driver size | 25 cm (10") cone woofer |
|---|
Amplifier and Power| amplifier output | 50 W |
|---|---|
| dynamic power | 100 W, 5 Ω |
| power supply USA and Canada models | AC 120V, 60 Hz |
| power supply Asia and General models | AC 110-120/220-240 V, 50/60 Hz |
| power consumption | 40 W |
Frequency| frequency response | 25 Hz - 180 Hz |
|---|
Weight and Dimensions| dimensions | 351 mm × 352 mm × 408 mm |
|---|---|
| weight | 12 kg |
Driver| driver size | 20 cm (8") cone woofer |
|---|
Amplifier and Power| amplifier output | 50 W |
|---|---|
| dynamic power | 100 W, 5 Ω |
| power supply USA and Canada models | AC 120V, 60 Hz |
| power supply Asia and General models | AC 110-120/220-240 V, 50/60 Hz |
| power consumption | 40 W |
Frequency| frequency response | 28 Hz - 200 Hz |
|---|
Weight and Dimensions| dimensions | 291 mm × 292 mm × 341 mm |
|---|---|
| weight | 8.5 kg |
Component that diffuses air for smooth flow, reducing noise.
Volume control, power switch, and power indicator.
Input terminal and voltage selector switch.
How to connect the subwoofer to amplifier audio outputs.
Procedure for connecting the subwoofer to the power supply.
Graphs showing the frequency response for both models.
To Next Page
