Need help?Do you have a question about the Yamaha NS-SW1000 and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Dynamic Power | 1000W |
| Frequency Response | 20Hz - 160Hz |
| Phase Switch | 0°/180° |
| Auto Standby | Yes |
| Advanced YST II | Yes |
| QD-Bass Technology | Yes |
| BASS (Bass Action Selector System) | Yes |
| Standby Power Consumption | 0.5W |
| Crossover Frequency | 40 Hz - 140 Hz (variable) |
| Inputs | RCA |
| Driver Size | 10" |
Lists all accessories included with the subwoofer for setup and operation.
Guide on optimal placement of the subwoofer for best acoustic performance and orientation.
Describes the unit's indicator light status and power on/off switches.
Details the various terminals for connecting the subwoofer to audio sources.
Explains controls for adjusting sound phase, bass effects, and high frequency cutoff.
Covers connecting to other Yamaha components and automatic power management features.
Connects the subwoofer to amplifier line output terminals using RCA cables.
Connects the subwoofer to an amplifier's LFE output for direct bass signal input.
Connects the subwoofer using speaker cables between the amplifier and subwoofer.
Connects the subwoofer to Yamaha components for simultaneous power control.
Guides on configuring the automatic standby mode based on input signal detection.
Details how to use volume, HIGH CUT, PHASE, and B.A.S.S. controls for optimal sound balance.
Explains the design and benefits of the Twisted Flare Port for smooth airflow and reduced noise.
To Next Page
