Yamaha TF1 Firmware Update Guide

TF5/TF3/TF1/TF-RACK/NY64-D Firmware Update Guide 1
TF5/TF3/TF1/TF-RACK/NY64-D Firmware Update Guide
Thank you for choosing a Yamaha product.
This guide explains how to update the TF series (TF5, TF3, TF1 and TF-RACK) and the NY64-D firmware.
■ Precautions (Please be sure to read this section first!)
・ The user assumes full responsibility for the update.
・ Please note that the device may be damaged if you fail to follow these instructions properly, or turn off
the device or operate any control/function while the update is in progress.
・ If the update fails, and the device still does not operate correctly even after you execute the update once
again, please contact your Yamaha dealer.
・ Yamaha Corporation owns exclusive copyrights for the TF series firmware, its update program, and the
update guide.
・ It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety, without
permission from the copyright owner.
・ The screen shots in this guide are for use with this update procedure only and may be different from the
actual screen shots.
・ The company names and product names in this document are the trademarks or registered trademarks of
their respective companies.

Yamaha TF1 Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	40 channels
Signal delay (@48kHz)	2.6 ms
Supported sample rates	48 kHz
Digital sound processing	10 bit
Built-in display	Yes
Nominal input level	10 dBu
Balanced line output level	12.3 V
XLR out	16
Booth out (RCA)	2
USB 2.0 ports quantity	1
DJ mixer	No
Audio input	16 mic/line (XLR/TRS combo)
Product color	Black, Silver
USB connector type	USB Type-B
Phantom power	48 V
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	100 W
Cables included	AC

Weight and Dimensions

Depth	599 mm
Width	510 mm
Height	225 mm
Weight	13500 g