BASIC FUNCTIONS
5 En
En
■ Switching the alarm on/off
At the set time, alarm sound plays back. During playback, operations below are available.
■ Stopping the alarm
The system automatically turns off under the following circumstance. When the system is off, all the indicators
turn off, and Bluet ooth operation, audio playback, input via button operations except are disabled.
• No components are connected via Blue tooth connection, INPUT connector, or radio source, or no sound is
played back for more than 20 minutes.
• No operation is performed for more than 8 hours while music is being played back.
Press ALARM.
When the alarm is on, the alarm indicator ( )
lights and alarm time is displayed for a while.
Alarm indicator ( )
Operations during playing back alarm sound
Press ALARM or .
y
• Unless you stop the alarm, the alarm stops after
60 minutes automatically.
• When you stop the alarm, the alarm time setting, etc., is
saved for convenient use next time.
• Press any buttons except ALARM and once to stop the
beep sound, and twice to stop the radio source (snooze
function). 4 minutes after the radio source is stopped, it
will start fading in again and after another minutes the
beep sound will resume (double snooze function).
• When the snooze function is activated, the alarm indicator
() and flash.
Alarm indicator ( )
Auto-power off
To Next Page
Loading...
Need help?
General
