Why is there too much noise on my Yamaha Stereo System?
If there is too much noise on your Yamaha Stereo System, the antenna may be connected improperly. Make sure the antenna is connected properly or use a commercially available outdoor antenna. The antenna is too close to the unit or to an electronic device. Position the antenna as far away as possible from the unit or the electronic device.
Why is there no sound coming from my Yamaha TSX-B232 Stereo System with iPod?
If you're not getting any sound from your Yamaha Stereo System when using an iPod, ensure the iPod is firmly set in the iPod dock. Also, check if headphones are connected to the iPod and remove them. Finally, make sure your iPod software is updated to the latest version by downloading the latest iTunes software.
Why does the clock on my Yamaha Stereo System keep resetting?
If the clock setting on your Yamaha Stereo System has been cleared, the unit may have remained unpowered for more than one week. If the power supply is interrupted for about one week, the time setting may be reset.
What to do if Yamaha Stereo System sound is distorted?
If the sound from your Yamaha Stereo System is distorted or has abnormal noise, the input source volume or the unit's volume (especially Bass) may be too high. Try adjusting the volume using the VOLUME control or adjust the Bass with the EQ. If you are using an external device, lower its volume.
Why is there too much noise during stereo broadcast on my Yamaha TSX-B232 Stereo System?
If there is too much noise during stereo broadcast on your Yamaha Stereo System, the radio station you selected may be far from your area, or the radio wave reception is weak in your area. Try manual tuning to improve the signal quality or use a commercially available outdoor antenna.
How to fix no sound from iPod on Yamaha TSX-B232?
If you're not getting any sound from your iPod on the Yamaha Stereo System, make sure the iPod is firmly set in the iPod dock. Also, check if headphones are connected to the iPod and remove them. If the issue persists, update your iPod software to the latest version using iTunes.
Why does playback stop immediately on my Yamaha Stereo System?
If playback doesn't start immediately or stops immediately on your Yamaha Stereo System, the disc may be dirty. Wipe the disc clean. The disc loaded into the unit may not be compatible. If the unit was moved from a cold to a warm place, condensation may have formed on the disc reading lens. Wait for an hour or two until the unit adjusts to the room temperature, and try again.
Why does my Yamaha Stereo System say “No Disc” or “CD Unknown”?
If your Yamaha Stereo System displays “No Disc” or “CD Unknown” when you insert a disc, the disc loaded into the unit may not be compatible. The disc might be dirty, or a foreign object may have adhered to it, so wipe the disc clean and remove any foreign objects. The disc may not contain playable files. Ensure that the disc is inserted with the label facing upward.
Why is my iPod not charging on Yamaha TSX-B232 Stereo System?
If your iPod isn't charging when docked in your Yamaha Stereo System, ensure the iPod is firmly set in the iPod dock. Also, if USB is selected as the audio source, select a different source.
Why does my Yamaha Stereo System turn off by itself?
If your Yamaha Stereo System turns off unexpectedly, the automatic system-off function may be activated. This unit will turn off if 60 minutes have passed without operation after stopping playback from a USB device or CD, or if the system has been on for 12 hours or more without any operation.
General| Karaoke | No |
|---|---|
| Impedance | 6 Ω |
| Bass reflex | - |
| Speaker type | 1-way |
| RMS rated power | 30 W |
| Number of speakers | 2 |
| Total Harmonic Distortion (THD) | 10 % |
| Product color | White |
| Disc loading type | Slot |
| Optical disc player | Yes |
| Playback disc formats | CD audio |
| Audio formats supported | AAC, MP3, WMA |
| Supported radio bands | AM, DAB, DAB+ |
| Preset stations quantity | 60 |
| Bluetooth profiles | A2DP, AVRCP |
| Apple docking compatibility | iPad, iPhone, iPod |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
| Bluetooth version | 2.1+EDR |
| Volume control | Digital |
Weight and Dimensions| Depth | 230 mm |
|---|---|
| Width | 370 mm |
| Height | 110 mm |
| Weight | 3900 g |
Guidelines for safe and optimal operation, covering installation, environment, and handling.
Essential warnings regarding fire, electric shock, and explosion risks.
Highlights of the unit's capabilities, including playback sources and Bluetooth.
Information on how to use the manual and its symbols.
List of items provided with the unit, such as remote control and antenna.
Detailed identification of buttons, ports, and displays on the unit's front.
Instructions for connecting an iPod to the unit's dock, including charging.
Explanation of symbols and indicators shown on the front panel display.
Details of the rear panel connections, including AUX and antenna.
Identification and function of all buttons on the remote control.
Specific remote control buttons for operating iPod functions like menu navigation.
Steps to power the unit on and off, and power saving clock display.
Guide to setting the unit's clock, including time format and auto-sync options.
How to select and play music from a connected iPod.
Using the remote control for iPod menu navigation and playback.
Configuring repeat and shuffle modes for music playback.
Instructions for inserting and playing audio CDs and data CDs.
Using the remote control to navigate folders on data CDs.
Displaying track, album, and artist information during CD playback.
How to connect and play music files from a USB device.
Using the remote control to navigate folders on USB devices.
Displaying track, file, and folder information during USB playback.
Configuring repeat and shuffle modes for USB playback.
Steps to pair your iPod, iPhone, iPad, or other device with the unit.
Detailed pairing steps for Apple devices and other Bluetooth components.
How to play music from a connected Bluetooth device.
Easy reconnection to previously paired Bluetooth components.
Methods to disconnect an active Bluetooth connection.
Initial scan and antenna connection for Digital Audio Broadcasting (DAB).
How to perform an initial scan again for DAB stations using the remote.
Tuning into and selecting available DAB stations.
Viewing station labels, signal quality, and audio format during DAB playback.
Storing favorite DAB stations for quick access.
Removing stored DAB station presets from memory.
Listening to previously stored DAB stations using preset numbers.
Tuning into and selecting FM radio stations.
Viewing station details, signal status, and RDS information for FM.
Storing favorite FM stations using auto or manual preset.
Removing stored FM station presets from memory.
How to connect external audio devices using the AUX input.
Details on alarm types (Source+Beep, Source, Beep) and audio sources.
Using the snooze feature to delay the alarm for a short period.
Step-by-step guide to setting alarm time, type, source, and volume.
How to enable or disable the alarm function.
Operations for pausing (snooze) or stopping an active alarm.
Using the DTA Controller app for advanced alarm settings on compatible devices.
Setting the unit to automatically turn off after a specified time.
Modifying bass, middle, and treble settings for audio playback.
Changing the brightness level of the front panel display.
Common problems and their solutions for sound, operation, and display.
Solutions for problems related to iPod connection and CD playback.
Troubleshooting steps for issues with USB device recognition and file playback.
Resolving issues with pairing, connecting, and audio playback via Bluetooth.
Solutions for DAB tuning, signal strength, and noise problems.
Addressing noise and weak reception issues for FM radio.
Troubleshooting common problems with the remote control's operation.
Information on compatible CD types, formats, and handling guidelines.
Specifications for USB mass storage devices and file format support.
Details on supported bitrates and sampling frequencies for MP3 and WMA files.
Guidelines for proper handling and care of discs to prevent damage.
Specifications for iPod connection, USB, AUX, and Bluetooth.
Technical data for amplifier output, headphone jack, and tuner frequency ranges.
Power supply, consumption, dimensions, and weight of the unit.
Guidelines for proper disposal of old equipment and batteries.
Further information on Bluetooth technology, standards, and handling.
Special instructions for UK models regarding mains plug wiring.
Precautions and warnings regarding the unit's laser component.
Details on obtaining guarantee information for EEA and Switzerland customers.
To Next Page
