Why some buttons do not work on my Yamaha TSX-B232 Stereo System?
If some button operations aren't working on your Yamaha Stereo System, the disc loaded into the unit may not be compatible. Use a disc supported by the unit.
Why does playback stop immediately on my Yamaha Stereo System?
If playback doesn't start immediately or stops immediately on your Yamaha Stereo System, the disc may be dirty. Wipe the disc clean. The disc loaded into the unit may not be compatible. If the unit was moved from a cold to a warm place, condensation may have formed on the disc reading lens. Wait for an hour or two until the unit adjusts to the room temperature, and try again.
Why does my Yamaha Stereo System say “No Disc” or “CD Unknown”?
If your Yamaha Stereo System displays “No Disc” or “CD Unknown” when you insert a disc, the disc loaded into the unit may not be compatible. The disc might be dirty, or a foreign object may have adhered to it, so wipe the disc clean and remove any foreign objects. The disc may not contain playable files. Ensure that the disc is inserted with the label facing upward.
Why does my Yamaha TSX-B232 Stereo System say “no operation”?
If the front panel display indicates “no operation” and a disc cannot be inserted or unloaded on your Yamaha Stereo System, the clock/alarm/tone settings may be in progress, or the alarm is playing. Complete the clock/alarm/tone settings or stop the alarm.
Why won't my Yamaha TSX-B232 Stereo System play MP3/WMA files from USB?
If MP3/WMA files on your USB device aren't playing on your Yamaha Stereo System, the USB device may not be recognized. Turn the system off and disconnect the USB device, then turn the system on and reconnect the USB device. The USB device may not contain playable files.
Why does my Yamaha Stereo System show “USB OverCurrent”?
If your Yamaha Stereo System displays “USB OverCurrent” and the front panel goes blank when connecting a USB device, an incompatible USB device may be connected, or the USB device is not firmly connected. Turn the system off and disconnect the USB device, then turn the system on and reconnect the USB device to the unit.
Why can't my Yamaha Stereo System tune into any DAB stations?
If your Yamaha Stereo System can't tune into any DAB stations, the antenna may be connected improperly. Make sure the antenna is connected properly. The initial scan operations were not performed. Perform the initial scan operations. The DAB signals are too weak. Change the height, direction, or placement of the antenna.
General| Karaoke | No |
|---|---|
| Impedance | 6 Ω |
| Bass reflex | - |
| Speaker type | 1-way |
| RMS rated power | 30 W |
| Number of speakers | 2 |
| Total Harmonic Distortion (THD) | 10 % |
| Product color | White |
| Disc loading type | Slot |
| Optical disc player | Yes |
| Playback disc formats | CD audio |
| Audio formats supported | AAC, MP3, WMA |
| Supported radio bands | AM, DAB, DAB+ |
| Preset stations quantity | 60 |
| Bluetooth profiles | A2DP, AVRCP |
| Apple docking compatibility | iPad, iPhone, iPod |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
| Bluetooth version | 2.1+EDR |
| Volume control | Digital |
Weight and Dimensions| Depth | 230 mm |
|---|---|
| Width | 370 mm |
| Height | 110 mm |
| Weight | 3900 g |
Guidelines for safe and optimal operation, covering installation, environment, and handling.
Essential warnings regarding fire, electric shock, and explosion risks.
Highlights of the unit's capabilities, including playback sources and Bluetooth.
Information on how to use the manual and its symbols.
List of items provided with the unit, such as remote control and antenna.
Detailed identification of buttons, ports, and displays on the unit's front.
Instructions for connecting an iPod to the unit's dock, including charging.
Explanation of symbols and indicators shown on the front panel display.
Details of the rear panel connections, including AUX and antenna.
Identification and function of all buttons on the remote control.
Specific remote control buttons for operating iPod functions like menu navigation.
Steps to power the unit on and off, and power saving clock display.
Guide to setting the unit's clock, including time format and auto-sync options.
How to select and play music from a connected iPod.
Using the remote control for iPod menu navigation and playback.
Configuring repeat and shuffle modes for music playback.
Instructions for inserting and playing audio CDs and data CDs.
Using the remote control to navigate folders on data CDs.
Displaying track, album, and artist information during CD playback.
How to connect and play music files from a USB device.
Using the remote control to navigate folders on USB devices.
Displaying track, file, and folder information during USB playback.
Configuring repeat and shuffle modes for USB playback.
Steps to pair your iPod, iPhone, iPad, or other device with the unit.
Detailed pairing steps for Apple devices and other Bluetooth components.
How to play music from a connected Bluetooth device.
Easy reconnection to previously paired Bluetooth components.
Methods to disconnect an active Bluetooth connection.
Initial scan and antenna connection for Digital Audio Broadcasting (DAB).
How to perform an initial scan again for DAB stations using the remote.
Tuning into and selecting available DAB stations.
Viewing station labels, signal quality, and audio format during DAB playback.
Storing favorite DAB stations for quick access.
Removing stored DAB station presets from memory.
Listening to previously stored DAB stations using preset numbers.
Tuning into and selecting FM radio stations.
Viewing station details, signal status, and RDS information for FM.
Storing favorite FM stations using auto or manual preset.
Removing stored FM station presets from memory.
How to connect external audio devices using the AUX input.
Details on alarm types (Source+Beep, Source, Beep) and audio sources.
Using the snooze feature to delay the alarm for a short period.
Step-by-step guide to setting alarm time, type, source, and volume.
How to enable or disable the alarm function.
Operations for pausing (snooze) or stopping an active alarm.
Using the DTA Controller app for advanced alarm settings on compatible devices.
Setting the unit to automatically turn off after a specified time.
Modifying bass, middle, and treble settings for audio playback.
Changing the brightness level of the front panel display.
Common problems and their solutions for sound, operation, and display.
Solutions for problems related to iPod connection and CD playback.
Troubleshooting steps for issues with USB device recognition and file playback.
Resolving issues with pairing, connecting, and audio playback via Bluetooth.
Solutions for DAB tuning, signal strength, and noise problems.
Addressing noise and weak reception issues for FM radio.
Troubleshooting common problems with the remote control's operation.
Information on compatible CD types, formats, and handling guidelines.
Specifications for USB mass storage devices and file format support.
Details on supported bitrates and sampling frequencies for MP3 and WMA files.
Guidelines for proper handling and care of discs to prevent damage.
Specifications for iPod connection, USB, AUX, and Bluetooth.
Technical data for amplifier output, headphone jack, and tuner frequency ranges.
Power supply, consumption, dimensions, and weight of the unit.
Guidelines for proper disposal of old equipment and batteries.
Further information on Bluetooth technology, standards, and handling.
Special instructions for UK models regarding mains plug wiring.
Precautions and warnings regarding the unit's laser component.
Details on obtaining guarantee information for EEA and Switzerland customers.
To Next Page
