Yamaha TSX-B15 User Manual (English)

Questions and Answers:

C
Christian BrownSep 13, 2025
Why can't I establish a Bluetooth connection on my Yamaha Stereo System?
- H
  heidi63Sep 13, 2025
  If you're having trouble establishing a Bluetooth connection with your Yamaha Stereo System, the unit might not be registered on the connecting device’s Bluetooth list, so perform pairing operations again. Also, if the unit is in Eco Standby mode, turn the unit on, then try to connect via Bluetooth. If another Bluetooth device is connected, terminate that connection first. Ensure the Bluetooth function of the device is turned on. If the pairing information has been deleted, perform pairing again. As a last resort, delete any pairing history of TSX-B15 on the iPhone/iPad/iPod touch, then pair with the TSX-B15 again.
L
Lucas MossAug 25, 2025
What to do if Yamaha Stereo System sound suddenly turns off?
- T
  Tammy HernandezAug 25, 2025
  If the sound suddenly turns off, it might be due to the Auto Standby function being enabled. To resolve this, turn the system on and play the source again. Alternatively, if the connecting device outputs at a very low volume, the Auto Standby function might be enabled. In this case, raise the volume of the connecting device.
C
Casey CarlsonAug 25, 2025
Why is sound cracked, distorted, or has abnormal noise on my Yamaha Stereo System?
- C
  cannontaraAug 26, 2025
  Cracked, distorted sound, or abnormal noise can occur if the input source volume or the unit's volume is too high. Try adjusting the volume using the VOLUME control.
D
Daniel MasonAug 27, 2025
What causes digital or high-frequency equipment to produce noises on Yamaha TSX-B15?
- A
  Alexandra GriffinAug 27, 2025
  If digital or high-frequency equipment is producing noise, it might be because the unit is placed too close to the equipment. Try placing the unit farther away from the equipment.
C
Cynthia ChenAug 27, 2025
How to fix Yamaha TSX-B15 when speakers make no sound?
- S
  Stacy RobertsAug 27, 2025
  If your Yamaha Stereo System speakers aren't producing sound, there might be a few reasons. First, check that the volume isn't set too low. Second, ensure you've selected the correct input source on your system. Finally, if the unit is setting the alarm, complete the alarm setting process, or press the designated button to cancel it.
J
Jill RobinsonSep 12, 2025
Why does my Yamaha TSX-B15 sound suddenly turn off?
- T
  Tyler JohnsonSep 12, 2025
  If the sound on your Yamaha Stereo System suddenly turns off, it might be due to the Auto Standby function. Try turning the system back on and playing the source again. Alternatively, if the connected device's volume is too low, the Auto Standby function might be activated; try increasing the volume on the connected device.
C
Cody CainSep 10, 2025
Why has the clock setting been cleared on my Yamaha TSX-B15 Stereo System?
- B
  brownchristopherSep 12, 2025
  The clock setting may be cleared if the unit is left unplugged for more than one week. Plug the power cable into the wall outlet firmly, and set the clock again.
K
Kristin NelsonSep 12, 2025
Why cannot I make this Yamaha Stereo System unit paired with the connecting device?
- M
  Meghan Flowers MDSep 12, 2025
  Pairing issues can arise for several reasons: The connecting device might not support A2DP, so perform pairing operations with a device which supports A2DP. The passkey of the connecting device might not be “0000”, so use a connecting device with a passkey “0000.” The units may be too far apart, so move the connecting device closer. Interference from other devices (microwave oven, wireless LAN, etc.) emitting signals in the 2.4 GHz frequency band could be the issue, so move the unit away from those devices. The unit might be in standby mode, so turn the unit on and perform paring. Another Bluetooth device might already be connected, so terminate that connection before pairing with the new device.
D
Danielle WarnerSep 3, 2025
What to do if my Yamaha TSX-B15 cannot charge the connected portable USB device?
- R
  Robert RussellSep 4, 2025
  If your Yamaha Stereo System isn't charging a connected portable USB device, it could be due to an incompatible USB device or an improper connection. Turn off the system and reconnect the USB device. If the problem persists, the USB device may not be chargeable with this unit.
J
Jeremy FoxSep 1, 2025
Why Yamaha TSX-B15 sound suddenly turns off?
- J
  julie96Sep 2, 2025
  If the sound on your Yamaha Stereo System suddenly turns off, the auto-power off function may be enabled. This function activates after 8 hours of no operation. To resolve this, simply turn the system back on and play the source again.

Yamaha TSX-B15 Specifications

General

Type	Stereo System
Brand	Yamaha
Model	TSX-B15
Speaker Configuration	2.0
Bluetooth	Yes
USB Port	Yes
FM Tuner	Yes
CD Player	No
Aux Input	Yes
Features	Alarm clock
Playback Media	Bluetooth, USB
Power Output	30W (15W + 15W)