4 En
OPERATION
This unit can play back radio and beep sound at the set time.
■ Setting the time and sound
BASIC FUNCTIONS
Adjusting the clock
A Press and hold CLOCK.
The display flashes.
B Adjust the time with TUNING.
C Press CLOCK.
If you want to cancel alarm setting mode, press .
y
If you press PRESET in step 2, you can select the time
display format (12 hours/24 hours).
The time settings are lost approximately one week after
unplugging the unit.
Alarm setting
A Press and hold ALARM for more than
2 seconds.
The alarm indicator ( ) and display flash.
B
Set the alarm time with
TUNING
.
An alarm will sound only once at the specified
time.
Radio will sound from 3 minutes before the
alarm time, and then beep will sound at the alarm
time.
C Set the alarm volume with VOLUME.
The volume level is displayed and the alarm
indicator
( ) lights.
D Press and hold ALARM for more than
2 seconds.
Alarm is set and the alarm indicator ( )
lights.
A / C
B
Note
A / D
C
B
Alarm indicator ( )
To Next Page
Loading...
Need help?
General
