9-37
9
5. Install the bolts and tighten them to the
specified torque.
EBU32460
Valve clearance
The correct valve clearance changes with
use, resulting in improper fuel/air supply or
engine noise. To prevent this, the valve clear-
ance must be adjusted regularly. This adjust-
ment however, should be left to a
professional Yamaha service technician.
EBU32470
Brakes
Replacement of brake components requires
professional knowledge. Brake service
should be performed by a Yamaha dealer.
EWB02572
Operating with improperly serviced or ad-
justed brakes could lead to a loss in brak-
ing ability and an accident.
EBU32480
Checking the front and rear brake pads
Each brake pad is provided with wear indica-
tor grooves, which allow you to check the
brake pad wear without having to disassem-
ble the brake. To check the brake pad wear,
check the wear indicator grooves. If a brake
pad has worn to the point that the wear indi-
1. Tailpipe
Tightening torque:
Tailpipe bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
UBAN12E0.book Page 37 Wednesday, June 30, 2021 2:17 PM
To Next Page
Loading...
