Yamaha WOLVERINE X2 2021 - Drive Select Lever Operation and Reverse Driving

7-3
7
TIP
 Engine power is restricted when the engine
is too cold. (See page 5-4.)
 For maximum engine life, never accelerate
hard when the engine is cold!
EBU37951
Drive select lever operation and re-
verse driving
NOTICE
ECB02151
 Do not shift without coming to a com-
plete stop and waiting for the engine to
return to normal idle speed. Damage to
the engine or drive train may occur.
 Improper gear selection may shorten the
life of V-belt.
Shifting: neutral to high and high to low
1. Stop the vehicle, and take your foot off
the accelerator pedal.
2. Apply the brake pedal, then shift by mov-
ing the drive select lever along the shift
guide. Make sure that the drive select le-
ver is completely shifted into position.
3. Release the parking brake, if applied.
4. Release the brake pedal and press the
accelerator pedal gradually.
1. Drive select lever
2. L (Low-range)
3. H (High-range)
4. N (Neutral)
5. R (Reverse)
2
5
4
3
1
UBAN12E0.book Page 3 Wednesday, June 30, 2021 2:17 PM