Yamaha WOLVERINE X2 2021 - On-Command Drive Knob Operation

5-15
5
NOTICE
ECB02061
Do not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the point
that the electric starter will not have
enough power to crank the engine. If this
should happen, remove the battery and re-
charge it.
EBU39431
Winch switch “ / ” (YXE85WTZN)
This switch is used when operating the winch
(page 5-37). Read this manual and the Winch
Owner’s Manual completely before operating
the winch switch.
EBU39121
On–Command drive knob
“2WD/4WD/DIFF. LOCK”
Stop the vehicle and move the On–Command
drive knob to change the drive mode to two–
wheel drive, four–wheel drive, or four–wheel
1. Winch switch (YXE85WTZN)
1
1. On-Command drive knob “2WD/4WD/DIFF. LOCK”
1
UBAN12E0.book Page 15 Wednesday, June 30, 2021 2:17 PM