5-30
5
When adjusting the damping force settings,
turn the adjuster in direction (a) until it stops,
and then count the clicks in direction (b).
Compression damping force
Fast compression damping force
To increase the fast compression damping
force and thereby harden the compression
damping, turn the fast compression damping
force adjusting bolt in direction (a). To de-
crease the fast compression damping force
and thereby soften the compression damp-
ing, turn the adjusting bolt in direction (b).
When adjusting the damping force settings,
turn the adjuster in direction (a) until it stops,
and then count the turns in direction (b).
Rebound damping setting:
Minimum (soft):
30 click(s) in direction (b)
Standard:
14 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
1. Fast compression damping force adjusting bolt
Fast compression damping force settings:
Minimum (soft):
1 3/4 turn(s) out
Standard:
1 1/2 turn(s) out
Maximum (hard):
Adjuster fully turned in
UBAN12E0.book Page 30 Wednesday, June 30, 2021 2:17 PM
To Next Page
Loading...
