For your safety – pre-operation checks
5-2
1
2
3
4
5
6
7
8
9
10
11
12
Clutch
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
7-21
Throttle grip
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable
and grip housing.
7-18, 7-28
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
7-27
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
7-25, 7-27
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
7-19, 7-20
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
7-28
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
7-29
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
7-29
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
4-12
ITEM CHECKS PAGE
B1U-9-13_1.book 2 ページ ２０２２年４月７日 木曜日 午後３時１４分
To Next Page
Loading...
