4-2
PRE-OPERATION CHECKS
1
2
3
4
5
6
7
8
9
ITEM CHECKS PAGE
Sidestand pivot
9 Check smooth operation.
6-26
9 Lubricate if necessary.
Chassis fasteners
9 Make sure that all nuts, bolts, and screws are properly tightened. —
9 Tighten if necessary.
Fuel tank
9 Check fuel level.
3-5–3-7
9 Add fuel if necessary.
Lights, signals and
9 Check proper operation.
—
switches
NOTE:
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a
very short time; and the added safety it assures is more than worth the time involved.
EWA00033
w
If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operat-
ing the motorcycle.
3WR-9-2A (E) 1~5 6/28/00 9:00 AM Page 35
ProCarManuals.com
To Next Page
Loading...
