9
*
Brake hoses
• Check for cracks or damage. √ √ √ √ √
• Replace. (See NOTE on page 6-4.) Every 4 years
10
*
Wheels
• Check runout, spoke tightness and for damage.
• Tighten spokes if necessary.
√ √ √ √
11
*
Tires
• Check tread depth and for damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√ √ √ √
12
*
Wheel bearings • Check bearing for looseness or damage. √ √ √ √
13
*
Swingarm • Check operation and for excessive play. √ √ √ √
14 Drive chain
• Check chain slack.
• Make sure that the rear wheel is properly aligned.
• Clean and lubricate.
Every 500 km and after washing
the motorcycle and riding in the rain
15
*
Steering bearings
• Check bearing play and steering for roughness. √ √ √ √ √
• Lubricate with lithium-soap-based grease Every 20,000km
16
*
Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened. √ √ √ √ √
17 Sidestand
• Check operation.
• Lubricate.
√ √ √ √ √
18
*
Sidestand switch • Check operation. √ √ √ √ √ √
19
*
Front fork • Check operation and for oil leakage. √ √ √ √
20
*
Rear shock absorber
assembly
• Check operation and shock absorber for oil leakage. √ √ √ √
21
*
Rear suspension relay
arm and connecting arm
pivoting points
• Check operation. √ √ √ √
• Lubricate with molybdenum disulfide grease. √ √
22
*
Carburetor
• Check starter (choke) operation.
• Adjust engine idling speed.
√ √ √ √ √ √
NO. ITEM CHECK OR MAINTENANCE JOB
ODOMETER READING (×1,000 km)
ANNUAL
CHECK
1 10 20 30 40
To Next Page
Loading...
