Yamaha XVS650A - SHIFT PEDAL ADJUSTMENT; Shift Pedal Rod Length Adjustment

–21–
SHIFT PEDAL ADJUSTMENT
INSP
ADJ
***************************************
***************************************
NOTE:
EB304080
SHIFT PEDAL ADJUSTMENT
1. Check:
 Shift pedal position
Check the shift pedal rod length
a
.
If the position is incorrect  Adjust.
Shift pedal rod length:
168 mm
2. Adjust:
 Shift pedal position
Adjustment steps:
 Loosen both locknuts
1
.
 To obtain the correct pedal position turn the
shift pedal rod
2
in or out.
Turning in:
shift pedal is lowered.
Turning out: shift pedal is raised.
 Tighten both locknuts.
 Align the mark on the shift shaft with the center
of the slit.
 Turn in the both side of the shift pedal rod more
than 4 times.